Marine Alkyd Anti-Rust Primer

Alkyd primer for corrosion protection of marine steel structures.

Konsultasi Teknis & Permintaan Penawaran

Standar Mutu ISO 9001:2015 & SNI Industri
Tersedia Technical Data Sheet (TDS) & MSDS
Dukungan Survey & Inspeksi Ketebalan DFT

A medium-oil modified alkyd primer formulated with anti-rust pigments for steel structures in marine and general industrial environments. It provides good adhesion and a hard, wear-resistant coating for moderate corrosive conditions.

Good adhesion to steel surfaces
Hard and wear
resistant coating
Suitable for moderate corrosive environments
Compatible with alkyd and chlorinated rubber topcoats

Mixing Ratio: Refer to Technical Data Sheet (TDS)

Suitable Surface: Newly installed steel structures and metal surfaces
Surface Preparation: Remove oil, grease, dust, soluble salts, and other contaminants; abrasive or mechanical preparation as required
Application Methods: Airless spray or brush
Mixing/Thinning: Stir thoroughly before use; use No. 1 Thinner when required
Drying/Recoat: Allow approximately 24 hours before recoating under standard conditions